Page 62 - CNC West April May 2022 copy

New Products New Products
repeatability of less than 0.005 mm.
GF Machining Solutions customer
SMART wire Technology
4.0-level process control.
Thanks to SMART wire’s monitor-
Single, quick actuation is designed to services offers a wide range of SMART
vides experts with a graphical view of
New Mini Workpiece Posi-
for AgieCharmilles CUT P
provide rapid open and closing of the wires to help optimize machine perfor-
the measurements.
ing capabilities, the machine operator
Series
tioning System
module with a 270° rotation.
mance and improve process continuity
The RUP1 probe uses a 20 MHz
always knows how much wire is avail-
—GF Machining Solutions
—SMW Autoblok
The system is Proofline-sealed and traceability.
transducer and provides a thickness
able for the current job. The moment
against dirt and swarf. It can be used with standard WPS and APS mod- ules with special clamping pins and
GF Machining Solutions show- measurement range of 1 mm to 20
SMW Autoblok has introduced the
a spool of SMART wire is installed,
cased the lat-
mm with an accuracy of better than
40-mm Workpiece Positioning Sys-
the CUT P machine recognizes the
est innovations
10 microns using touch points. The
tem (WPS) Mini. The company says available length of wire and provides
Dynamic Production Ma-
in electrical
tip ball is user-replaceable and is pre-
it is well-suited for small workpieces
the operator with peace of mind that
adapters that are case-hardened with corrocshioinn-resiwstaitnht cSoamtinagl.l Footprint
discharge ma-
served by a protective cap that can be
that require quick part changeover.
there will be enough wire on the spool
The WPS Mini is part of SMW
chining (EDM)
automatically removed and maximizes
The workholding system is designed
to complete cutting operations without
—DMG MORI
at its booth at
tip ball life. The RUP1 probe is fully
with an emphasis on flexibility and interruptions.
Autoblok’s full line of WPS clamping
As the successor of the MILLTAP
EMO Hannover
compatible with the MRS2 change
speed. It is designed to be inter-
At the same time, wire traceability
modules, which are offered in 60-,
700 (with more than 3,000 machines
2019, including
rack using the RCP TC-3 rack change
changeable with all types of industry
is enhanced with SMART wire’s ability
80- and 160-mm heights. All modules installed), the DMP 70, by DMG
SMART wire
port and is interchangeable with all
stationary workholding systems.
to provide information such as date of
can be mounted on a t-slotted table or MORI, is designed to offer maximum
which lever-
other probe options available for the
The WPS Mini features manual manufacture, type, lot and expiration
grid plate manufactured with highly productivity in the smallest space.
ages radio fre- REVO system.
zero-point clamping that attaches date, which is transmitted via RFID to
tempered quality steel with a special- With a footprint of 46.28 sq. ft., it is
quency identifi-
cation (RFID) technology for Industry
directly to the workpiece, provides the machine report.
ized coating to protect against rust and 10% smaller than the MILLTAP 700.
maximum holding force of 25 kN and
contaminants.
Travel paths of 27” x 16” x 15” and the
Bryan Crawford
1847 Elmfield Ave.
Long Beach, CA, 90815 562-597-7824 cell: 562-243-4659 becrawford@mindspring.com
SALES SERVICE CONSULATION
CINCINNATI MILLS
We have the repair parts and
accessories to keep them going. Complete Machines Too!! INDUSTRIAL SURPLUS MACHINERY
Cincinnatirepairparts.com
860-796-4655
CNC WEST October/November 2019
60
www.CNC-West.com
CNC WEST April/May 2022
90
www.CNC-West.com