2019cnc4-5

CNC WEST April/May 2019 www.CNC-West.com 77 sales@coastindustrialsales.com 714-282-6711 REPRESENTING: California, Nevada and Arizona matt@clarkmfrs.com 206.393.2653 REPRESENTING: Washington, Oregon, Idaho and Montana EXPANDING FOR OVER SEVENTY YEARS, WORKHOLDING YOU CAN TRUST. WESTWARD! COAST INDUSTRIAL SALES, INC. MANUFACTURER’S REPRESEN TATIVE ph 574-294-1506 www.speedgrip.com salesweb@speedgrip.com New Products also use Makino’s new fully digital ES200Agenerator that provides faster machining speeds with an increase in power of up to 80 Amps, and uses the Hyper-i control that delivers a com- mon interface for all Makino EDM’s and contains many helpful advanced functions. The revised EDBV3 machine design has focused on streamlining production applications and is engi- neered to improve the machining speed while minimizing the non-value-added motions. The rapid feedrate of the machines X/Y/Z travels of 14.65” x 10.63” x 29.53” has been doubled from 5 meters-per-minute to 10 meters-per- minute, which will reduce the overall tact time for positioning. The machines standard integrated 2-axis rotary table has also been reconfigured so that the workpiece is closer to the center of rotation (reduces positioning distance), and the indexing speed has been im- proved from 3 RPM to 10 RPM. The new EDBV3 provides a larger Z-axis stroke that supports electrode tube lengths up to 29.5” and features a fully enclosed work zone with interlocks for increased safety. TheATC (automatic tool change) times have been reduced, as the ATC unit has been raised so that the work tank does not need to more or drain during electrode exchanges. New High Speed 5-Axis VMC —Matsuura Making its debut in the United States this year, the MAM72-70V from Matsuura Machinery is a high-speed, large-capacity five-axis VMC. “The MAM72-70V is designed to handle a greater workpiece size than Matsuura’s existing models, offers faster response times and delivers higher productivity,” says David Hudson, vice president of sales and marketing. The machine features a maximum workpiece capacity of 700 × 500 mm (diameter × height), with a load capacity of 500 kg per pallet. These dimensions represent an 11 percent increase in part capacity, a 43 percent increase in weight and a 38 percent increase in envelope volume compared to the MAM72-63V. Anewly developed fourth/fifth-axis table, equipped with a roller gear drive for the fourth axis and direct-drive motor for the fifth axis, achieves rapid traverse rates of 50 rpm and 100 rpm, respectively. Improvements to the MAM72 structure promote ergonomic operation and easier access for setup and mainte- nance. The distance from the machine front (oil pan edge) to the pallet center is now 620 mm. The MAM72-70V is described as “IoT-ready,” offering measurable remote and real-time monitoring of the machine’s status, condition and performance. High-Accuracy CMM Line Expands —ZEISS Suitable for measuring small, in- tricate parts, the MICURA coordinate measuring machine (CMM) line from ZEISS Industrial Metrology - with ac- tive scanning and submicron accuracy - now includes a model with an even larger measuring range. The MICURA CMM can handle bigger parts with a 40% larger measuring range of 500 mm x 700 mm x 500 mm and has a