CNC West Dec jan 2019

CNC WEST December 2018/January 2019 www.CNC-West.com 79 New Products It's easy to say your tooling solves problems. It's harder to prove it. We prove it every day. Prospect Heights, IL 847-749-0633 info@heimatecinc.com www.heimatecinc.com Heimatec AD5349 Color 1/4 pg CNC West 2017 Stuck on a tough tooling challenge ? Let us help. Heimatec isn’t just a world leader in live tools, angle heads and multi-spindle drill heads; we’re your source for problem solving and tooling application expertise. With years of hands-on experience and the most innovative tooling, we are your TOTAL solution source. Put us to the test and send us your toughest tooling challenge. applications within semiconductor and metrology equipment. Consisting of a glass disk bonded to a hub and a scanning unit that scans the fine graduation on the surface of the disk, these ERP 1000s are offered with four different size disks and segments. The disks can have up to 63,000 lines with accuracy to +/- 0.9 arc seconds and up to 2600 RPM. A reference mark is included, and multiple scan- ning units could be used to increase accuracy even further. The scanning units also have the new custom ASIC HSP 1.0 which is Heidenhain Signal Processing and forces the stabilization of the signals through an advanced LED brightness control.When the scanning unit detects contamination, the LED intensity is in- creased to help increase the reflectivity and therefore reducing amplified noise. The end result is a super stable encoder output that ensures high reliability. The scanning unit cable exit can also be ordered with either a straight-out configuration, or a 90-degree exit, both having left or right options as well, so squeezing into tight spaces is possible. The scanning units come with either an analog 1Volt peak to peak or TTL electrical interface. The TTL versions can have up to 1000x interpo- lation, yielding an unprecedented 252 million counts of resolution per 360 degrees on the largest disk. X-treme Jet Thread Turn- ing Toolholder —Carmex Designed for more effec- tive coolant flow and improved chip control, Carmex’s new X-treme Jet External Thread Turning Toolholder provides two connecting options via an elbow fitting and top clamp to more precisely direct the coolant flow to the cutting edge, where it is most effective. Happy Holidays and Happy New Year From CNC-WEST!!! Thanks for reading our magazine in print and online. Our entire staff wishes you the best in 2019 Shawn Arnold