Page 73 - 2021cnc6-7

New Products
Powered by the ProtoTRAK RMX conversational control platform, the new VMC2 maintains all the features from larger models, including DXF conversion, tool path visualization and TRAKing.
New High-Precision Touch
Probe
—HEIDENHAIN
HEIDENHAIN’s new TS 750 high-precision touch probe is now available for in-process workpiece measurement in grinding machines and lathes. This extremely durable new probe offers the ability to state the reproducibility of its jobs at in- creased probing speeds better than its competitors. And the low probing force inherent in the new TS 750 is an important benefit when working with soft or delicate workpieces.
The TS 750 operates with high- precision pressure sensors, with force analysis for generating the trigger pulse. The forces that arise during probing are processed electronically.
This method delivers extremely ho- mogeneous, 360° probing accuracy. It offers high probing speed of up to 1 m/ min and does not require a minimum speed.
Also, due to its very low probing forces of approximately 1.5 N (axial) and 0.2 N (radial), the TS 750 can at- tain high probing accuracy (±1 μm) and repeatability with almost no ef- fect on the measured object. Only on further deflection do the forces of the
springs take effect until the machine stops.
Delivering reliable measurements after prolonged use -even after five mil- lion probing cycles- this TS 750 touch
probe is still highly accurate: with a probing repeatability of down to 2 σ ≤ 0.25 μm at its high probing speed. This is highly unusual in the industry.
ARN Machine Tool Rebuilding INC
FAMILY OWNED SINCE 1968, SERVING WESTERN STATES
Machine Tool Repair, Service, Rebuild & Modifications Custom Machines, Tools & Fixtures Build To Your Needs
For Details see Website www.arnrebuild.com
Tel 714-692-7647 E Mail armtsinc@aol.com 22343 La Palma Ave #117 Yorba Linda CA 92887
Precision Rifles &
Process Refinements
"With our new NHX5000, we quickly
realized keeping it busy would be a chore - it's so productive! We had to focus on high-density, high-workload fixtures. The new machine and fixtures have cut run-times by 40% on some parts, and the RPS 5 has totally removed lost time on changeovers.These fixtures have been LOADED with Mitee-Bite."
Jon Addis, Area 419 Firearms
WORKHOLDING SPECIALISTS
Free Design Consults
MiteeBite.com 800-543-3580
CNC WEST June/ July 2021
www.CNC-West.com 71
IMAGE COURTESY OF AREA 419 FIREAMS